Stairville MH-x30 LED Beam User Manual page 31

Behaviour on DMX errors
Display illumination
System reset
Reset to factory defaults
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the menu item 'DMX Fail' and press [Setup]. Now you can use [Up] or [Down] to choose
'Off' (blackout on DMX errors) or 'Hold' (retaining the current settings on DMX errors).
When the display shows the desired value press [Setup] to save the setting and close the sub‐
menu. To close the submenu and the main menu without making changes, press [Mode] or
wait for 20 seconds.
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the menu item 'Back Light' and press [Setup]. Now you can use [Up] or [Down] to choose
'On' (display constantly lit), 'Off' (display turns off 15 seconds after the last keystroke) or
'Adjust' (to select the display brightness between 0 and 10).
When the display shows the desired value press [Setup] to save the setting and close the sub‐
menu. To close the submenu and the main menu without making changes, press [Mode] or
wait for 20 seconds.
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the menu item 'Reset' and press [Setup]. Select 'Yes' and press [Setup] to reset all mov‐
able axes to their home positions.
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the menu item 'Factory Sets' and press [Setup]. Select 'Yes' and press [Setup] to reset all
settings to default.
Operating
MH-x30 LED Beam
31
Moving Head