Stairville MH-x30 LED Beam User Manual page 30

Operating
Tilt inversion
Dimmer curve
MH-x30 LED Beam
30
Moving Head
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the option 'Tilt Invert' and press [Setup]. Now you can use [Up] or [Down] to choose
between 'No' (normal tilt direction) and 'Yes' (inverted tilt direction).
When the display shows the desired value press [Setup] to save the setting and close the sub‐
menu. To close the submenu and the main menu without making changes, press [Mode] or
wait for 20 seconds.
Press [Mode] repeatedly until the display shows 'Settings' . Press [Setup]. Use [Up] or [Down] to
select the option 'Dimmer Curve' and press [Setup]. Now you can use [Up] or [Down] to choose
from the following dimmer curves:
Display
'Square'
'Linear'
'S Curve'
'InSquare'
When the display shows the desired value press [Setup] to save the setting and close the sub‐
menu. To close the submenu and the main menu without making changes, press [Mode] or
wait for 20 seconds.
Meaning
Inverted square curve with a steep profile at the begin‐
ning and flat profile at the end
Linear (proportional) course
Non-linear curve with a distinctive flat profile at the
beginning and end
Inverted quadratic curve with a steep profile at the
beginning and flat profile at the end