H3C S12500 Series Configuration Manual page 38

# Enable global IGMP snooping.
[SwitchB] igmp-snooping
[SwitchB-igmp-snooping] quit
# Create VLAN 100, assign GigabitEthernet 3/0/2 to the VLAN, and enable IGMP snooping in
the VLAN.
[SwitchA] vlan 100
[SwitchA-vlan100] port gigabitethernet 3/0/2
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] quit
Verifying the configuration
On Switch A:
1.
# Display EVI-Link interface information.
[SwitchA] display evi link interface tunnel 0
Interface
Evi-Link0
# Display dynamic IGMP snooping forwarding entries.
[SwitchA] display igmp-snooping group
Total 1 entries.
VLAN 100: Total 1 entries.
(0.0.0.0, 228.8.8.8)
Host slots (0 in total):
Host ports (1 in total):
On Switch B:
2.
# Display EVI-Link interface information.
[SwitchB] display evi link interface tunnel 0
Interface
Evi-Link0
# Display Router port information.
[SwitchB] display igmp-snooping router-port
VLAN 100:
Router slots (0 in total):
Router ports (1 in total):
ELNK0
# Display dynamic IGMP snooping forwarding entries.
[SwitchB] display igmp-snooping group
Total 1 entries.
VLAN 100: Total 1 entries.
(0.0.0.0, 228.8.8.8)
Host slots (1 in total):
Host ports (1 in total):
Status Source
UP 1.1.1.1
ELNK0
Status Source
UP 1.1.2.1
chassis 1 slot 3
GE3/0/2
Destination
1.1.2.1
(00:04:01)
Destination
1.1.1.1
(00:02:35)
31