Motion Computing LE1600TC User Manual page 77

PROBLEM
The Motion Digitizer Pen tip
doesn't line up with the arrow-
cursor when I tap on the screen.
When I write, I unintentionally click
the pen function button while I'm
writing with the pen.
The pen button doesn't work. I
can't get it to right-click.
The buttons on the Tablet Client
don't do what I expect them to do.
I /P
NTERFACE ORTS
The system doesn't recognize the
PC card I've inserted.
The system doesn't recognize a
USB device.
CAUSE
The pen and display need
recalibrating.
You're pressing the pen button
with your thumb or finger when
you write or gripping the pen too
tightly and accidentally pressing
the pen button. This enables the
right-click function of the pen.
The right-click option for the pen
button may be deactivated.
You may not be correctly timing
clicking the pen button and
tapping the pen on the display.
The button functions are pre-
configured and cannot be
changed.
The card is incorrectly inserted.
The device is not supported.
Windows XP may take a short
time to recognize the device.
The accessory isn't connected to
the Tablet Client correctly.
The correct driver isn't built into
Windows XP.
Motion Computing LE1600
SOLUTION
Refer to "Calibrating Your Digitizer
Pen" on page 20.
Try these hints:
• Readjust how you hold the pen.
Place your fingers on either side
of the pen function button when
you write.
• Practice using the pen function
button with both your index fin-
ger and thumb to see which
you prefer.
• Relax your grip. Only a light
touch is needed to write with
the pen.
• Deactivate the pen right-click
function through WACOM Pen
Settings. Instead, press and
hold the pen to the display sur-
face to right-click.
Re-activate the right-click option:
Double-click the WACOM Pen
Settings icon, select Pen Options,
and reselect Use pen button to
right-click. Select Apply>OK.
To right-click, hold the pen button
down and then firmly tap on the
display.
The buttons are pre-configured.
Eject the card and re-insert it with
the label side up.
Check Windows XP compatibility.
Wait until Windows XP recognizes
the device.
Check the connection cable and
be sure it is inserted into the
correct port on the Tablet Client
and the accessory device.
Use the device's installation CD or
check the manufacturer's website
for the correct driver.
Tablet Client User Guide
TC
69