Motion Ac Adapter; Motion Battery Pack; Tablet Client Buttons, Connectors, And Indicators - Motion Computing LE1600TC User Manual

Chapter 1 Getting Started with Your Tablet Client
The fingerprint reader also serves as a scrolling device; you can move
your finger vertically (from top to bottom) to scroll the cursor within the
active application window.

Motion AC Adapter

The Motion AC Adapter has three components:
• AC power adapter
• Power cord
• AC mini-plug with folding prongs that can be

Motion Battery Pack

Each Motion Tablet Client ships with a Lithium-ion (Li-ion) battery mounted
and latched at the top edge of the Tablet Client. Extra batteries are
available from Motion Computing. An optional Extended Battery is
available that provides additional hours of continuous operation.
T C
The following illustration shows the buttons, connectors, and other
ABLET LIENT
B , components on the Tablet Client. While there are no controls on the back
UTTONS
side of the Tablet Client, there is a sliding panel that covers the Extended
C ,
ONNECTORS
Battery connector. This panel must be open before connecting the optional
AND
Extended Battery. The connector panel should be closed when not being
I
NDICATORS
used.
6 Motion Computing LE1600
used instead of the long cord when traveling
CAUTION: Use the Motion AC Adapter with your
Motion Tablet Client. This adapter should not be used
to power any other electronic devices. If you do so,
you may damage the accessory or the other device.
WARNING: To avoid personal injury, handle the
battery with care. Do not open, puncture, short, or
expose it to fire or water. Keep the battery in an
ambient temperature of less than +104°F (+40°C);
for example, do not leave it in a closed car in hot
weather for an extended time.
For additional safety information, see the Safety and
Regulatory Guide packaged with your Tablet Client.
Tablet Client User Guide
TC