Motion Computing LE1600TC User Manual page 76

PROBLEM
The battery seems to run down
very quickly (lasting less than
three hours after a full charge).
D
ISPLAY
The desktop is too big for the
display – I can't see all of the
desktop icons.
When I disconnected a second
monitor from the Tablet Client, the
image became too big for the
Tablet Client display.
The display looks dim.
The screen is unreadable or
distorted.
P
EN
The Tablet Client digitizer screen
doesn't respond to the plastic
stylus I use on my PDA.
68 Motion Computing LE1600TC Tablet Client User Guide
CAUSE
Accessory devices such as a DVD
player and applications that make
heavy use of the hard drive drain
the battery more quickly.
The battery is weakening or
defective.
Screen resolution is set higher
than the default 1024 x 768 with
32-bit resolution.
The Tablet Client has attempted to
spread the image of a window or
desktop beyond the screen area
of the active monitor.
Brightness is set too low.
Screen resolution and/or color
quality are set incorrectly.
Display driver has become
corrupted or uninstalled.
You're using the wrong input
device.
SOLUTION
Use AC power when possible and/
or turn off the accessory devices.
All batteries weaken over time, but
if a new battery is needed, visit the
Motion website to order a new
battery.
Decrease the screen resolution by
opening the Motion Dashboard,
selecting Graphics Properties,
then the Schemes tab.
1. Tap the Properties button on the
Motion Dashboard.
2. Tap Graphics Options, then
Graphics Properties... to open the
Properties screen.
3. Select Notebook to make the
Tablet Client the primary display.
Adjust brightness from the Motion
Dashboard.
Reset resolution to 1024 x 768
and color quality to 32-bit by
opening the Motion Dashboard,
Graphics Properties, then the
Schemes tab.
1. Open the Windows Control
Panel, select Performance
and Maintenance (Category
View). or System (Classic
View).
2. Select the Hardware tab.
3. Select Device Manager.
4. Open Display adapters.
5. Double-tap on an adapter.
6. Select the Driver tab.
7. Choose Update Driver... and
follow the Installation Wizard.
Only the Motion Digitizer Pen lets
you write on the Tablet Client
display. The Tablet Client doesn't
respond to other tablet pens or to
a plastic stylus.