Appendix A Troubleshooting And Support; Solutions To Common Problems - Motion Computing LE1600TC User Manual

All Motion Computing Tablet Clients have passed a rigorous series of
performance and quality-control tests, but now and then a problem may
occur. If you do not see a solution among the following system and software
issues, check the section "Support Options" in this chapter or go to our
website at www.motioncomputing.com/support.
S
OLUTIONS
T C
O OMMON
P
ROBLEMS
PROBLEM
P
OWER
The Tablet Client won't start when
I slide the Power switch.
The Tablet Client won't shut down. An application has locked up the
The display goes black while the
Tablet Client is still turned on.
B
ATTERY
Data loss during battery swap.
Troubleshooting and Support
CAUSE
The Power switch hasn't been
fully engaged.
Fully discharged battery or no
battery and no AC power.
Tablet Client.
The Tablet Client system has gone
into stand by after sitting idle for a
period of time. (In this state, the
power LED flashes blue.)
The unit is designed to maintain
the data and settings for up to 30
seconds in stand by while you
swap the battery. This time may
vary due to your system and the
programs you're running.
Motion Computing LE1600
Appendix
SOLUTION
Slide and hold the power switch
for at least a half-second, but no
more than three seconds.
Connect the AC adapter to
operate the Tablet Client and
charge the battery.
Press the SAS button (small
button with a key icon nearby) to
start Windows Task Manager and
close the application, or
Slide and hold the power switch
for at least 5 seconds to force a
shutdown of the Tablet Client.
Slide the power switch for about a
second to resume operations.
When you swap the battery with
the unit in stand by, be sure to
save your data before removing
the battery to avoid data loss.
Tablet Client User Guide
TC
A
67