Access To Unauthorized Loudspeakers - Genelec Smart IP Manager Operating Manual

Smart IP Manager - System Operating Manual
3. Enter the Username and Password you want to have for this zone.
4. Apply the changes to zone credentials by clicking 'Apply' and click the 'boot' button.
Figure 34. Setting the zone credentials.
After applying the settings, the loudspeakers will be booted. Later on the zone list will show as
"unknown" zone, the loudspeakers which credentials were changed are now listed under that with
"Unauthorized" status. To open access, follow instructions in next chapter or 20 or change the
Smart IP Manager system credentials from Audio network settings (Audio network settings).

5.5.5.2 Access to Unauthorized Loudspeakers

When loudspeaker credentials do not match the user default credentials in audio network settings,
the loudspeakers cannot be accessed. These loudspeakers are indicated with a black exclamation
mark (!) and show 'unauthorized' status and are grouped under an 'unknown' zone as shown in
Figure 35.
1
3
page 38 of 48
2
4