Detailed status is as follows:
2010-10-22 10:35:36 PDT Created
2010-10-22 10:35:36 PDT Updated
2010-10-22 10:35:36 PDT Errored
vlun
Displays inactive Virtual LUNs (VLUNs) and those which have not been reported by the host
agent
Reports VLUNs that have been configured but are not currently being exported to hosts or
host-ports
Displays when too many VLUNs have been created
Format of Possible vlun Exception Messages
vlun vlun:(<vvID>, <lunID>, <hostname>)"Path to <wwn> is not is not seen by host" vlun
vlun:(<vvID>, <lunID>, <hostname>) "Path to <wwn> is failed"
vlun host:<hostname> "Host <ident>(<type>):<connection> is not connected to a port"
vlun -- "<count> active VLUNs exceeds the supported limit of <max count>"
vlun Example
Component ---------Summary Description--------- Qty
vlun
Hosts not connected to a port
Component -----Identifier----- ---------Detailed Description--------
vlun
host:cs-wintec-test1 Host wwn:10000000C964121D is not connected to a port
vlun Suggested Action
Check the export status and port status for the VLUN and HOST with CLI commands such as
showvlun, showvlun -pathsum, showhost, showhost pathsum, showport, servicehost
list, etc. For example:
cli% showvlun -host cs-wintec-test1
Active VLUNs
Lun VVName HostName
2 BigVV
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName
2 BigVV
cli% showhost cs-wintec-test1
Id Name
0 cs-wintec-test1 Generic 10000000C964121D ---
cli% servicehost list
HostName -WWN/iSCSI_Name-
host0
10000000C98EC67A 1:1:2
host1
210100E08B289350 0:5:2
Lun VVName
2
BigVV
-Host_WWN/iSCSI_Name-
cs-wintec-test1 10000000C964121C
-Host_WWN/iSCSI_Name- Port Type
cs-wintec-test1 ----------------
Persona -WWN/iSCSI_Name- Port
10000000C964121C 2:5:1
Port
HostName
cs-wintec-test1 10000000C964121D
task.
Executing "upgradecage -a -f" as 0:12109
upgradecage: Invalid option: -f
1
Port Type
2:5:1 host
--- host
-Host_WWN/iSCSI_Name-
Troubleshooting Storage System Components
Port
Type
3:5:1 unknown
65