Starting The Programme; End Of The Programme/Unloading Laundry - Miele WTD 160 Operating Instructions Manual

5. Starting the programme

 Touch the flashing Start/Add laundry
sensor control.
The door will lock and the drying
programme will start.
If a delay start period has been
selected, this counts down on the time
display. At the end of the delay start
period or immediately after the
programme has started, the programme
running time appears on the time
display.
Laundry can be added or removed at
any time, provided that the  symbol
is not illuminated in the display (see
"Changing the programme sequence –
Adding laundry").
Saving energy
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
To reactivate the indicators:
 Touch the Start/Add laundry sensor
control (this does not have any effect
on a programme that is running).
6. End of the programme/
unloading laundry
In the anti-crease phase, the drum
continues to turn for up to 150 minutes
after the end of the programme. The
door is locked. The control field lights
up for the first 10 minutes. The control
field then goes out and the Start/Add
laundry sensor control flashes.
 Turn the programme selector to the
 position.
The door will unlock.
If you unload the laundry during the
anti-crease phase, heat can build up.
Spread the laundry out to cool it
down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull open the door.
 Remove the laundry.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Remove all items from the drum.
Tip: See "Washing and drying – After
each washing or drying programme".
DRYING
43