Add Detergent; Programme Start/Finish; After Each Washing Or Drying Programme - Miele WTD 160 Operating Instructions Manual

WASHING AND DRYING

5. Add detergent

 Dispense detergent either with Cap
dosing or via the detergent dispenser
drawer.

6. Programme start/finish

 Touch the flashing Start/Add laundry
sensor control.
The door is locked.
The programme will start.
The anti-crease phase will start at the
end of the programme.
The door remains locked during the
anti-crease phase.
 Touch the Start/Add laundry control
or turn the programme selector to the
 position.
The door will unlock.
If you have unloaded the drum
during the anti-crease phase make
sure you spread out the laundry to
allow it to cool down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull the door open and unload the
laundry.
See "After each washing or drying
programme".
48
After each washing or drying
programme
 Open the door fully.

Risk of burning due to hot metal.
The metal cap located on the inside
of the door glass will be hot after
drying.
Do not touch the metal cap.
 Remove the laundry.
Laundry left in the drum could shrink,
discolour or be damaged in the next
washing or drying programme.
Check that all items have been
removed from the drum.
 Check the door sealing ring for any
foreign objects. After drying, remove
any fluff from around the door sealing
ring and the door glass.
Tip: Leave the door slightly open to
allow the drum to dry.
 Turn the programme selector to the
 position.
Tip: Leave the detergent drawer slightly
open to allow it to dry.