Miele WTD 160 Operating Instructions Manual page 9


Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee the safety standards of the machine.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised technician to protect the user from danger.

This washer-dryer must not be used in a non-stationary location
(e.g. on a ship).

Do not make any alterations to the washer-dryer, unless
authorised to do so by Miele.

Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN 50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.

The manufacturer's warranty will be invalidated if the washer-dryer
is not repaired by a technician authorised by Miele.

Make sure the washer-dryer door can be opened without
hindrance after installation.
Warning and Safety instructions
9