Advertisement
Quick Links
G2002-M+ Status LED
2 x Gigabit Ethernet (RJ-45)
48Vdc Jack
G.hn Port (RJ-45)
G2002-M+ Port and LED Definition
Troubleshooting
The G2002-M+ has four (4) Status LEDs:
•
PWR: it will be ON when powered from the GAM
or when connected to a local power source. If it is
OFF, please verify the GAM-12-M or GAM-24-M is
connected to a GAM-PWR-12-M+ or GAM-PWR-
24-M+ when you intend to use line powering (only
supported over 2 copper pairs – MIMO mode). If
you intend to locally power the G2002-M+, please
make sure it is connected to a 48V wall adapter
plugged into a working power jack.
•
STA: it will be yellow while the G2002-M+ is
booting and then will be OFF.
•
G.hn: it will be ON (green) to indicate that the link
to the Internet is UP. It will be OFF in the link is
DOWN. It will blink ON and OFF to indicate a
bad link. You can restart the G2002-M+ if you
see a blinking G.hn LED. If this does not solve
the problem, please reach out to your Operator
for assistance.
•
POE: Green indicates port GE1 is providing POE
to an attached device.
GE1 POE
status LED
WWW.POSITRONACCESS.COM
© Positron Access Solutions
5101 Buchan Street, Suite 220,
Montreal, QC H4P 2R9 Canada
info@positronaccess.com
G2002-M+
Self-installation Guide
Document 180-0225-001-R01
Advertisement
Related Manuals for Positron G2002-M+
Summary of Contents for Positron G2002-M+
- Page 1 OFF. • G.hn: it will be ON (green) to indicate that the link © Positron Access Solutions to the Internet is UP. It will be OFF in the link is DOWN. It will blink ON and OFF to indicate a 5101 Buchan Street, Suite 220, bad link.
- Page 2 Step 2. Connect the port labeled as LINE to your telephone jack. Unpacking the G2002-M+ Step 3. (OPTIONAL) The G2002-M+ is line powered from the GAM. If you intend to locally power the G2002-M+ using the optional 48Vdc wall-adapter, you should locate the G2002-M+ close to a wall power plug and connect the 48Vdc wall adapter to the 48V connector of the G2002-M+.
Need help?
Do you have a question about the G2002-M+ and is the answer not in the manual?
Questions and answers