Positron TeleLite 720920 Series Manual
  1. Manuals
  2. Brands
  3. Positron Manuals
  4. Network Hardware
  5. TeleLite 720920 Series
  6. Manual

Positron TeleLite 720920 Series Manual

Poe and pse optical plug-in cards
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TeleLite Quad Ethernet
POE and PSE Optical Plug-in Cards
Model #s: 720920xxx / 720930xxx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TeleLite 720920 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Positron TeleLite 720920 Series

Summary of Contents for Positron TeleLite 720920 Series

  • Page 1 TeleLite Quad Ethernet POE and PSE Optical Plug-in Cards Model #s: 720920xxx / 720930xxx...
  • Page 2 Confidentiality Notice The information contained in this document is the property of Positron Inc. Except as specifically authorized in writing by Positron Inc., the holder of this document: 1) shall keep all information contained herein confidential and shall protect same in whole or in part from the disclosure and dissemination to all third parties, and 2) shall use same for operating and maintenance purposes only.

  • Page 3: Table Of Contents

    4.1 Service and Support ......................18 4.2 Technical Customer Support ....................18 4.3 Repair Service ........................18 4.4 Warranty ..........................19 4.5 Limitation of Liability ......................19 4.6 Disclaimer Notice ........................20 4.7 Cancellation and Rescheduling Charges ................20 Copyright 2017 Positron, Inc.

  • Page 4: Telelite Quad Ethernet Poe And Pse Optical Plug-In Cards

    CAT 5 Ethernet cable is required to interface with the RJ receptacles on the faceplate of the TeleLite Ethernet cards. Power and Switch settings are common to all versions above. As such, the model numbers herein are referred to with the suffix “xxx” rather than MST, SSC, or SXC. Copyright 2017 Positron, Inc.

  • Page 5: General Technical Notes

     Comprehensive LED display with per-port indicators allows status monitoring and activity of every port at a glance.  Switch design delivers dedicated bandwidth to each port.  100mbps of Ethernet through-put is shared equally among the RJ-48 receptacles used Copyright 2017 Positron, Inc.

  • Page 6: Type 1 And Type 2 Telelite Ethernet Configurations

    Ethernet modem 10 Base-T / 100 Base-TX 10 Base-T / 100 Base-TX NTWK Modem NTWK EDGE EDGE DEVICE DEVICE C.O. Packet Switched Network 300V NTWK NTWK EDGE Point EDGE DEVICE DEVICE Figure 2: Type 1b Copyright 2017 Positron, Inc.

  • Page 7: Type 2, General

    EDGE DEVICE TeleLite Model #720930xxx Ethernet CFJ card TeleLite Model #720920xxx Ethernet Point DEVICE OEI card as 4-port Ethernet Modem as single port or multi-port Modem Interface Fiber to copper conversion Figure 4: Type 2a, Fiber-fed Copyright 2017 Positron, Inc.

  • Page 8: Type 2B Detail

    Which of the two cards is to be set to master and which to slave  Is the modem feeding, or being fed by, the TeleLite Ethernet MDIX enabled?  What POE and PSE settings best suit the application of the cards? Copyright 2017 Positron, Inc.

  • Page 9: Type 1A: 720930Xxx Telelite Poe Ethernet Card

    (MDI-X) interface. Auto MDI-X ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDI-X configuration to properly match the other end of the link. Copyright 2017 Positron, Inc.

  • Page 10: Type 1B: 720930Xxx Telelite Poe Ethernet Card

    (MDI-X) interface. Auto MDI- X ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDI-X configuration to properly match the other end of the link. Copyright 2017 Positron, Inc.

  • Page 11: Oei For Type 1A Or Type 1B

    (MDI-X) interface. Auto MDI- X ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDI-X configuration to properly match the other end of the link. Copyright 2017 Positron, Inc.

  • Page 12: Type 2A And Type 2B Telelite "Campus" Configuration

    DEVICE Ethernet OEI card as 4-port ‡ DEVICE card as single-port or multi-modem single Point Ethernet Modem port transport as Interface Fiber to Copper Conversion Type 2b, Fiber fed ‡ = Individual Ethernet Modem(s Figure 16 Copyright 2017 Positron, Inc.

  • Page 13: Type 2A And Type 2B, Poe

    (MDI-X) interface. Auto MDI- X ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDI-X configuration to properly match the other end of the link. Copyright 2017 Positron, Inc.

  • Page 14: Type 2A And Type 2B, Pse

    (MDI-X) interface. Auto MDI- X ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDI-X configuration to properly match the other end of the link. Copyright 2017 Positron, Inc.

  • Page 15: Rj-45 Pin-Outs

    RJ-45 Pin-outs The RJ-45 Receptacles are NOT polarity sensitive. Copyright 2017 Positron, Inc.

  • Page 16: Optical Connectors

    Single-mode fiber with SC fiber connector (1550 ηm wavelength laser) Range: ≈ 50 miles (80.5km) • The foremost optical connector is the TX port to the companion TeleLite Ethernet card • The rearmost optical connector is the RX port to the companion TeleLite Ethernet card Copyright 2017 Positron, Inc.

  • Page 17: Types Of Connectors

    ARE NO ALARMS RJ-45 Receptacle LEDs RJ-45 Receptacle LEDs RJ-45 Receptacle LEDs Upper AMBER LED: Lower GREEN LED: ON = Link ON = 100 Base-TX OFF = No Link OFF = 10 Base-T Flashing = Activity Copyright 2017 Positron, Inc.

  • Page 18: Specifications

    Single-mode fiber: 9/125 μm (SSC and XSC type cards) Operating Temperature -40°C to 65°C (-40°F to 149°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Humidity (non-condensing) 20% to 80% Altitude -60m to 3,050m (-200 ft to 10,000 ft) relative to sea level Copyright 2017 Positron, Inc.

  • Page 19: Important Information

    (US and Canada) or +1-514-345-2220 Option 1, Option 3 (International). Repair Service All warranty repairs are performed at no cost. Positron reserves the right to repair or replace any equipment that has been found to be defective. For information about out-of-warranty repairs, contact Positron’s Repair department at 1-888-577- 5254 (US and Canada) or 001-514-345-2220 (International).

  • Page 20: Warranty

    (including negligence), shall be limited to the value of the order. Positron shall not be obligated to repair or replace any item of the equipment which has been repaired by others, abused or improperly handled, improperly stored, altered or used with third...

  • Page 21: Disclaimer Notice

    Although Positron Inc. has made every effort to ensure the accuracy of the information contained herein, this document is subject to change without notice due to ongoing product development.

This manual is also suitable for:

Telelite 720930 series

Table of Contents