Advertisement
Quick Links
G1002-M+ Status LED
2 x Gigabit Ethernet (RJ-45)
48Vdc Jack
G.hn Port (RJ-45)
G1002-M+ Port and LED Definition
Troubleshooting
The G1002-M+ has four (4) Status LEDs:
•
PWR: it will be ON when connected to
a local power source. If it is OFF, please
verify you have connected the 48V wall
adapter to a working power jack.
•
STA: it will be yellow while the G1002-M+
is booting and then will be OFF.
•
G.hn: it will be ON (green) to indicate that
the link to the Internet is UP. It will be OFF
in the link is DOWN. It will blink ON and
OFF to indicate a bad link. You can restart
the G1002-M+ if you see a blinking G.hn
LED. If this does not solve the problem,
please reach out to your Operator for
assistance.
•
POE: Green indicates port GE1 is
providing POE to an attached device.
GE1 POE
status LED
WWW.POSITRONACCESS.COM
© Positron Access Solutions
5101 Buchan Street, Suite 220,
Montreal, QC H4P 2R9 Canada
info@positronaccess.com
G1002-M+
Self-installation Guide
Document 180-0224-001-R01
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Positron G1002-M+
Summary of Contents for Positron G1002-M+
- Page 1 G.hn: it will be ON (green) to indicate that the link to the Internet is UP. It will be OFF © Positron Access Solutions in the link is DOWN. It will blink ON and OFF to indicate a bad link. You can restart 5101 Buchan Street, Suite 220, the G1002-M+ if you see a blinking G.hn...
- Page 2 Step 2. Connect the port labeled as LINE to your telephone jack. Unpacking the G1002-M+ Step 3. Connect the 48V wall adapter to a nearby power plug and connect it to the 48V connector of the G1002-M+ Power plug Telephone jack G1002-M+ Step 3 Step 2...
Need help?
Do you have a question about the G1002-M+ and is the answer not in the manual?
Questions and answers