Paser SKT 170 HYUNDAI Installation Manual

QUICK MENU

Reading the system status.

Reset the tyres status elaboration

Reset Odometer
1. Reset? 2. Back
 Odometer Value

Settings
1. Language ►Italiano ►English ►Français (►Deutsch ►Español ►Português)
2. Volume ►1 ►2 ►3 ►4
3. System Control ►Enabled ►Disabled
4. Threshold alarm level for tyre pressure warning ►Low
5. Warning threshold distance ►Enabled ►Disabled
6. Speed Limit ►15000 km ►20000 km
►Disabled
7. Speed Limit ► 30 km/h ► 50 km/h ► 70 km/h ► 90 km/h ►110 km/h ► 130 km/h
► 150 km/h ►Deactivate

Back
 Exit
CAR TIRES PRESSURE SPEED LIMIT EXCEEDING
YEAR
MODEL MONITORING SYSTEM
HYUNDAI
i20 2011> O
i30 2011> O
i40 2011> O
iX20 2011> O
iX35 2011> O
SANTA FE 2011> O
TPMS alert cases

Tyre pressure under the range
 Structure of the tyre compromised
 Vehicle loading level unequal
 The wheels of an axle are overloaded
 Vehicle with snow chains

Vehicle with spare tyre

A wheel of the vehicle has been substituted
WARRANTY CONDITIONS
THIS PRODUCT HAS A TWO-YEAR GUARANTEE FOR ANY KIND OF MANUFACTURING DEFECT.
THE FISCAL DOCUMENT SERVES AS THE GUARANTEE VALIDITY.
►5
►Medium ►High
►30000 km ►40000 km
WORN TIRES PLUG & PLAY
ALERT ADVICE ALERT ADVICE HARNESS
O O CBL060TPHY11
O O CBL060TPHY11
O O CBL060TPHY11
O O CBL060TPHY11
O O CBL060TPHY11
O O CBL060TPHY11
MOD.UT.10 rev.01 del 07/02/12
Emissione: UT ufficializzazione: QU
INSTALLATION MANUAL
SKT 170 HYUNDAI
Electronic Module for HYUNDAI vehicle
and driver Safety
DESCRIPTION
SKT 170 Hyundai is an electronic unit, easy to install, that allows to control the status of the car's tyres
pressure, while the vehicle is driving.
In particular, the unit in object has been studied to inform the user concerning all surveys of anomaly about
any pressure loss. The innovative characteristic is that the device bases its working mode exclusively by elab-
orating the data received from the CAN BUS net. This means that the installation doesn't involve the installa-
tion of sensors into the tyres.
The unit once detected the anomaly, informs the user about the trouble found, also indicating which is the tyre
flat. This information is reproduced by a vocal synthesis available on board of the circuit. The system is sup-
plied with a PLUG & PLAY cable that makes the installation easy and safety.
INSTALLATION
1. Remove the OEM radio, the panel is assured to the dashboard trough grafts, consequently
use carefully plastic levers to remove it .
2. Connect the cable supplied
connectors to the vehicle and the radio and connect the multi-way connector to the module
The information in this guide are purely for information purposes, therefore, are subject to change without notice. At the time of publication the information
is correct and reliable. However Paser can not be held responsible for any consequences resulting from errors or omissions in this manual. Paser reserves
the right to improve / change the product or manual without obligation to notify users.
Nr.50 100 6307 Rev. 01
UNI EN ISO 9001:2008
rev. 2.0 12
with the kit in series with OEM