Rip - Huawei SmartAX MT880 User Manual

being initiated; the state changes to active when packets
are being exchanged, or closed when the exchange is
complete. TCP connections in the open handshaking state
can use up the available IP sessions. If the percentage is
exceeded, then the open handshaking sessions will be
closed and replaced with new sessions as they are
initiated.
Max ICMP Count: Sets the percentage of concurrent IP
l
sessions that can be used for ICMP messages. If the
percentage is exceeded, then older ICMP IP sessions will
be replaced by new sessions as they are initiated.
Max Host Count: Sets the max number of concurrent IP
l
session that can originate from the computer. This number
should take into account the number of hosts on the LAN.
III.
Save
Click the Submit button to save the settings in the RAM.
l
To save these configuration changes permanently, enter
l
the Tools>System Setting page, and click Save &
Restart button to save new settings.

4.13 RIP

Click the RIP of Advanced in the Wizard Column to set the
rules of firewall. The MT880 supports RIP v1 and RIP v2 used to
share routing tables with other Layer 3 routing devices on your local
network or remote LAN. If your network does not employ another IP
routing device, it will not be necessary to enable RIP.
4-33