Huawei SmartAX MT880 User Manual page 46

II.
Parameter explanation
Status: Select to enable or disable IP filter, the default is
l
"Enabled".
Name: Enter a name for the rule, for easier identification
l
later. Click Clear button to delete the entered name.
Action: Select "Allow" to permit packets to pass through
l
the MT880 if they meet the criteria of this rule, and "Deny"
to drop packets that meet the criteria of this rule.
Source: When
l
drop-down menu, this filter will apply to packets that have
one of the specified IP addresses as their source, and are
sent from a PC on your LAN. When WAN is specified in the
Interface drop-down menu, this filter will apply to packets
that have one of the specified IP addresses as their source,
and are sent from a PC on the WAN (Internet). If both are
selected, then this rule will apply to packets that are sent
from PCs on both the WAN and LAN.
Destination: When LAN is specified in the Interface
l
drop-down menu, this filter will apply to packets that have
one of the specified IP addresses as their destination, and
are being sent to a PC on your LAN. When WAN is
specified in the Interface drop-down menu, this filter will
apply to packets that have one of the specified IP
addresses as their destination, and are being sent to a PC
on the WAN (Internet). If both are selected, then this rule
will apply to packets that are being sent to PCs on both the
WAN and your LAN.
Schedule:
l
access virtual server.
LAN is
Select the time period for Internet user to
4-25
specified in the Interface