Huawei SmartAX MT880 User Manual page 55

I.
Configuration page
Figure 4-20 RIP Configuration
RIP can be enabled on any existing WAN or LAN interfaces. It
may be specified to receive RIP requests and reply to them, it can be
specified to send RIP queries, or to both receive and send RIP
packets. Furthermore, the RIP version can be specified. The table
below lists the parameters that can be specified for the pull-down
RIP menus. Click the Apply button to setup RIP as specified.
II.
Parameter explanation
Interface Name: It shows the interface on which you want
l
to share routing table information with other routing
devices.
RIP 1 Received: Select to enable or disable receiving
l
route information using RIP v1.
RIP 1 send: Select to enable or disable sending route
l
information using RIP v1.
RIP 2 Received: Select to e nable or disable receiving
l
route information using RIP v2.
4-34