Safety Information - Lectron Level 2 Charging Station User Manual

Safety Information

• Failure to read and follow instructions could result in injury or death.
• Do not disassemble the charging station.
• Install the charging station away from heat sources, as well as dusty or
corrosive places.
• The charging station produces a high voltage output. You must pay
attention to personal safety when using it.
• If a malfunction occurs, it may cause an electric shock or even death.
• Regularly check whether the charging station has visible damage. An
electric shock may occur when operating a damaged charging station.
• If a ground fault occurs, it must be assumed that the cable still carries
voltage. Make sure to shut down any high voltage power before
inspecting the charging station.
• Before powering the charging station, please confirm that the device is
properly grounded.
• Do not modify, retrofit, or change any part by yourself under any
circumstances.
• To ensure the service life and stable operation of the charging station, the
operating environment should be kept as clean as possible with a
relatively stable temperature and humidity. The charging station must not
be used in a flammable environment.
• Make sure that the input voltage, frequency, circuit breakers, and other
conditions of the charging station meet the specifications before
powering it on.
• This charging station is compatible with the SAE-J1772 charging
standard. Charging a Tesla requires an adapter.
Charging Station Overview
Display Screen
LED Indicators
On/Off Button
Charging
Handle
Page 2