Lectron 40 Amp Level 2 EV Charger User Manual page 6

5. When the vehicle is fully charged, the LED indicator light will stay solid.
Your vehicle has a gauge on the dashboard that can also show that the vehicle is
fully charged. Refer to your vehicle's manual to find the location of the gauge on
your dashboard.
6. Disconnect the charging coupler when the charging is completed by pressing the
release button on the Charging Coupler and removing it from the vehicle.
Note:
240 VAC Operation: the charger requires either a 240 VAC split phase, or a 208 VAC
two phase dedicated circuit. It draws a maximum of 40 amps continuous current.
+ 0 km 6/6 A
Fully Charged
210 V
Page 6