What's In The Box; Installation Steps: Assembling Your Bike; Headset Assembly - Ride1up REVV 1 Owner's Manual

2. What's in the Box?

The Revv 1 will arrive fully wrapped with foam and cardboard and include the following in our Accessory
Box:
Accessory Box:
User Manual
•
Ride1Up Gift
•
Battery Charger
•
• (2) Keys
• Ride1Up Allen Wrench Set
• (2) 13/15 Double Wrenches
8/10 Double Wrench
•
(2) Pedals – R & L
•
12mm M5 Screws
•
34 mm M6 Screw
•

3. Installation Steps: Assembling Your Bike

Please scan QR Code below for Revv 1 Assembly Video.

3.1 Headset Assembly

PLEASE COMPLETE STEPS IN ORDER.
Remove the stem faceplate on the headset by loosening the four screws using a 4mm allen wrench.
§
Place the handlebars onto the stem and secure it in place by screwing back on the faceplate.
§
Tighten the 4 screws in an "X" pattern to ensure tightness is distributed evenly.
§
Place the two turn signals near each side of the headlight and secure them by screwing and
§
tightening the nuts.
Insert the two turn signals and tighten with attached bolts.
§
For the most up to date documents, bike models, additional information, instructional videos,
10
And more visit us at Ride1UP.com