Related Manuals for Ride1up REVV 1
Summary of Contents for Ride1up REVV 1
- Page 1 E-bike Owner’s Manual Model: REVV 1 For the most up to date documents, bike models, additional information, instructional videos, and more, visit us at Ride1UP.com...
- Page 2 Phone: (888) 494-1415 Contact Us: https://ride1up.com/contact/ For the most to date information on your Revv 1, please scan the QR Code below for a digital copy of your Owner’s Manual. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 3: Table Of Contents
Model: Revv 1 Table of Contents 1. Safety Notes ..........................5 1.2 E-bike Safety: .......................... 6 1.3 Electrical Safety: ........................6 1.4 Brake Safety: ........................... 6 1.5 Maintenance: ........................... 7 1.6 Additional Warnings: ....................... 7 1.7 Notable Bike Parts: ......................... 9 2. - Page 4 8.5 Walk/Push Assist (4mph) ..................... 20 8.6 Off Road Mode ........................20 9. Error Code Troubleshooting: ....................21 10. Warranty Information: ......................22 For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 5: Safety Notes
Have maintenance/repairs done by a qualified bicycle mechanic. Never use/ride any Ride1Up bike product in ways precluded by the manufacturer and the laws of your state and local municipality. It is your responsibility to comply the laws in which you are operating the e-bike. Laws vary depending on location in which you operate the bike. -
Page 6: E-Bike Safety
1.3 Electrical Safety: Only use the charger supplied by Ride1UP and never tamper or modify the charger in any way. Do not leave the e-bike or battery plugged into a wall outlet unattended. Unplug the battery before leaving the bike alone. -
Page 7: Maintenance
The e-bike is intended for use by those at least eighteen years of age. Use by anyone below the age of eighteen is prohibited. Riders must have the physical condition, reaction time, and mental capacity to ride For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 8 Accidents increase in wet weather conditions. Keep your e-bike and packaging materials such as plastics, foam, and cardboard away from children. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 9: Notable Bike Parts
Never operate a bike while under the influence of alcohol, drugs, or any substance or condition that could impair motor functions, judgement, or the ability to safely operate a bike. 1.7 Notable Bike Parts: For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 10: What's In The Box
2. What’s in the Box? The Revv 1 will arrive fully wrapped with foam and cardboard and include the following in our Accessory Box: Accessory Box: User Manual • Ride1Up Gift • Battery Charger • • (2) Keys • Ride1Up Allen Wrench Set •... -
Page 11: Front Wheel Assembly
The right pedal (marked “R”) must be installed in the right crank arm. It is standard thread, rotate • clockwise to install and tighten. • Use a 15mm wrench on pedals to finish tightening the pedals in place. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 12: Detailed Torque Settings
5. E-bike Basics & Care 5.1 E-bike Basics: Your Revv 1 e-bike will arrive with a center LCD display, light controls next to the right grip, and functional controls near the left grip. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 13 If PAS is on and at 1 or higher, if the pedals are bumped and move forward when next to or moving the bike, power will be sent to the motor and the bike will accelerate. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 14: Battery Basics & Care
The fender arms are also malleable and sometimes need to be bent with the wheel off to be centered with the wheel. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 15 If you are unsure of the cause, please review our support page at www.Ride1UP.com. You can also share a clear video without wind noise to Support@Ride1UP.com. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 16: Troubleshooting Problems
(6.1.a) Display Settings: Perhaps a setting was accidentally changed. Try resetting the display by conducting a factory reset. Review the display manual or display support page on www.Ride1UP.com to reset the display. Steps to complete this procedure are listed on the last page of this owner’s manual. -
Page 17: Charging The Battery
If you ever see a spark while charging your battery. Please inspect the charging port of the battery and the tip of the charger. Please contact Support@Ride1UP.com and share pictures. Follow the steps when charging battery: Step 1. Turn the bike off. The LCD will be off. -
Page 18: Battery Basics & Care
40-80%. Recommended storage temperatures are 50°-77°F and will provide the best performance out of the battery. Storage should be done in a dry area. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 19: Lcd Display Instructions
To change the assist level, press the MINUS (-) or PLUS (+) buttons until desired level is displayed in the top right corner. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 20: Speed & Mileage Mode Switch
8.6 Off Road Mode The Revv 1 is shipped with a default Class 2 (pedelec) setting which limits top speeds to 20mph using throttle and pedal assist. For speeds more than 28mph, rider must contact Ride1Up Customer Support to acknowledge private road use only and compliance with local laws and regulations. -
Page 21: Error Code Troubleshooting
The controller temperature is high enough to reach the protection point 0x11 The motor temperature is high enough to reach the protection point 0x12 The current sensor is broken For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 22: Warranty Information
NOTE: (Full warranty terms can be found at https://ride1up.com/terms-and-conditions/) All Ride1UP electric bikes come with a One-Year Limited Warranty from date of purchase. Defective items or parts will be replaced and shipped to the holder of the warranty only. Warranties are not transferable to parties other than the original purchaser. - Page 23 After the first 30-days, Ride1UP will ship replacement parts of defective items within one year at no charge. The owner will be responsible for labor. Warranty parts will be shipped within the U.S. only at our cost. It will be necessary to send an email with a photo and/or video as requested to support@ride1up.com...
Need help?
Do you have a question about the REVV 1 and is the answer not in the manual?
Questions and answers