Related Manuals for Ride1up CORE-5
Summary of Contents for Ride1up CORE-5
- Page 1 E-bike Owner’s Manual CORE-5 For the most up to date documents, bike models, additional information, instructional videos, and more, visit us at Ride1up.com...
- Page 2 Ride1UP Customer Support Contact: Phone: (888) 494-1415 Contact Us: https://ride1up.com/contact/ For the most effective assembly resources on your CORE-5, please scan the QR Code below for the video assembly tutorial: For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 3: Table Of Contents
Model: Core-5 Table of Contents 1. Safety Notes 1.1) Personal Safety 1.2) E-bike Safety 1.3) Electrical Safety 1.4) Brake Safety 1.5) Maintenance 1.6) Additional Warnings 2. Installation Steps: Assembling Your Bike 2.1) Fork/Headset Assembly 2.2) Front Wheel Assembly 2.3) Seat Post Assembly 2.4) -
Page 4: Safety Notes
1.3) Electrical Safety: Only use the charger supplied by Ride1UP. Do not store the bike or battery plugged into a wall outlet. Unplug the battery before leaving the bike alone. Never modify the charger in any way. The charger has been designed for a specific voltage, always check that the outlet’s voltage is the same as that stated on the... -
Page 5: Brake Safety
Never hitch rides on other vehicles. Never hold an item which interferes with your grip on the handlebars & never be under the influence of alcohol or drugs while riding. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 6 Be sure to follow all requirements of airlines and air couriers regarding lithium batteries if you take your e-bike with you during air travel, or if you ship your e-bike by air courier. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 7: Installation Steps: Assembling Your Bike
Check the routing of the cables again before installing stem with handlebars. You may need to flip § your handlebars for proper routing. Slowly slide the stem with attach handlebars onto the fork steerer tube. (Figure C) For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 8 Do not touch the brake pads or brake rotors with your fingers. The oil will contaminate them and § cause noises when braking. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
- Page 9 Open the seat clamp and insert the seat post to or past the minimum insertion point. (Figure 8 & 9) • Adjust the suitable height and rotate the clamp to tighten and then shut it. (Figure 10) • For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
- Page 10 Screw each pedal into a crank by hand. They should screw in easily to start. Do not force them. • For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
- Page 11 Adjusting your derailleur properly will be done best by a mechanic, however it can be accomplished by following a helpful video. Please check our support pages at www.Ride1UP.com for the latest tips and video on how to do this properly.
-
Page 12: Spoke Tension
DESTROY THE BATTERY. THIS IS ESPECIALLY IMPORTANT IF YOU LIVE IN A WET CLIMATE. 4. Charging the Battery: WARNING DO NOT LEAVE CHARGING BATTERY UNATTENDED ◆ For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 13 Also, it must not be covered. If you ever see a spark while charging your battery. Please inspect the charging port of the battery and the tip of the charger. Please contact Support@Ride1UP.com and share pictures. Follow the steps when charging battery: Step 1.
- Page 14 If you stop to look at something or talk with someone, please turn off your bike for safety. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 15: Common Assembly/Unboxing Issues
If for any reason you get confused about the order of the headset pieces, please take pictures and send them to Support@Ride1UP.com. (6.2) Bent Derailleur Hanger: Firstly, do not start riding and shift into 1 gear before checking the alignment of the derailleur and hanger. -
Page 16: Error Code Troubleshooting
After the hanger is straightened, the derailleur/gears can be indexed (under adjustments) to remove any additional clicking or grinding noises. If you cannot fix the derailleur hanger, new ones can be found online. Ride1UP will cover the cost if it arrived bent. 7. Error Code Troubleshooting: In the event of a problem with the electrical components of your bike, the display will show an error code. -
Page 17: Warranty Information
NOTE: (full warranty terms listed on website) All Ride1UP electric bikes come with a One-Year Limited Warranty from date of purchase. Defective items or parts will be replaced and shipped to the holder of the warranty only. Warranties are not transferable to parties other than the original purchaser. - Page 18 After the first 30-days Ride1UP will ship replacement parts of defective items within one year at no charge. The owner will be responsible for labor. Warranty parts will be shipped within the U.S. only at our cost. It will be necessary to send an email with a photo and/or video as appropriate to support@ride1up.com...
Need help?
Do you have a question about the CORE-5 and is the answer not in the manual?
Questions and answers