HP Enterprise ProLiant MicroServer Gen10 User Manual page 19

Power on the server
6. Press the Power On/Standby button.
7.
Verify that the system power LED changes to green.
8.
Update the following:
System ROM
•
• Storage controller
• Network controller
Set up the storage
9.
Set up the storage. Do one of the following:
If the drives are connected to the onboard LFF/SFF drive SATA port, set up RAID using the Marvell BIOS
•
Utility.
• If the drives are connected to an HPE Smart Array controller option, do one of the following:
◦ If the HPE Rapid Setup Software USB drive is shipped with server, set up automatic RAID using the RSS.
◦ Set up RAID using the HPE Smart Storage Administrator. Launch the HPE SSA from an ISO image using one
of the following methods:
– Burn the image to a CD or DVD.
– Flash the image to a USB memory key or SD card on an HPE UEFI bootable server.
– Install the image on a PXE server.
For more information, see HPE Smart Array SR Gen10 Configuration Guide at the Hewlett Packard
Enterprise:
https://www.hpe.com/info/smartstorage-docs
An SSD or optical drive installed in the media bay does not support RAID configuration.
Deploy an OS or virtualization software
10. Install an operating system (OS).
19
Setup