Denon AVC-X4800H Owner's Manual page 112

Contents Connections
Adjusting the tone (Tone)
Adjusts the tonal quality of the sound.
1
Press OPTION.
An option menu screen is displayed.
When the input source is "HEOS Music", an option menu for
0
online music is displayed. Select "AVR Options...", then press
ENTER.
2
Use cursor Up/Down to select "Tone", then press
ENTER.
The "Tone" screen is displayed.
3
Use cursor Left/Right to set the tone control function to
on/off.
On:
Off
(Default):
Front panel Display
Playback
Allow tone adjustment (bass, treble).
Playback without tone adjustment.
Rear panel
Settings
4
Select "On" in step 3 and press cursor Down to select
the sound range to be adjusted.
Bass:
Treble:
5
Use cursor Left/Right to adjust the tone, then press
ENTER.
-6 dB – +6 dB (Default : 0 dB)
0 "Tone" settings are stored for each input source.
0 This cannot be set when the sound mode is set to "Direct" or "Pure Direct".
0 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 174)
0 You cannot set this when no audio signal is input or in the menu "HDMI Audio Out"
is set to "TV". (v p. 178)
112
Remote
Tips Appendix
Adjust bass.
Adjust treble.
Index