Denon AVC-X4800H Owner's Manual page 176

Contents Connections
Graphic EQ
Uses the graphic equalizer to adjust the tone of each speaker.
0 Speakers for which "Graphic EQ" can be set differ according to the sound mode.
0 This can be set when "MultEQ ® XT32" setting is "Off". (v p. 173)
0 This cannot be set when the sound mode is set to "Direct" or "Pure Direct".
0 If you are using headphones, you can set the equalizer for headphones.
(v p. 176)
o Graphic EQ / Headphone EQ
Set whether to use the graphic equalizer or not.
On:
Off
(Default):
0 "Headphone EQ" is set in the menu when headphones are used.
Front panel Display
Playback
Use the graphic equalizer.
Do not use the graphic equalizer.
Rear panel
Settings
o Speaker Selection
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Left/Right
(Default):
Each:
o Adjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default: 0.0 dB)
0 Front Dolby, Surround Dolby and Back Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
176
Remote
Tips Appendix
Adjust all speaker tones together.
Adjust the left and right speaker tones
together.
Adjust the tone for each speaker.
Index