Setup - Chicago Electric 60373 Owner's Manual & Safety Instructions

Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
ASSEMBLY
Adjusting the Wheel Guard
TO PREVENT SERIOUS INJURY: Do not operate this tool without the Wheel Guard properly installed.
1. Loosen the Wheel Guard Bolt.
2. Rotate the Wheel Guard as needed to
shield you during the planned work.
Installing the Side Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without the Side Handle properly installed.
1. The Side Handle may be installed on
either side of the Gear Housing.
Page 12 For technical questions, please call 1-888-866-5797.
3. Tighten the Wheel Guard Bolt securely.
4. Check the Wheel Guard to ensure it is
firmly in place. Adjust if necessary before proceeding.
2. Screw the threaded end of the
Side Handle into the selected position.
Tighten securely before beginning work.
Item 60373