Carrying out a reset of the measuring
instrument
Configuration mode is open, "RESET" is displayed.
◄
1
Press
MENU/ENTER:
o
NO: Do not carry out reset.
o
YES: Carry out reset. The instrument is reset to the factory
settings.
The instrument returns to measurement view.
Measuring
Damage to sensor possible!
- Do not touch sensor!
The instrument is switched on and is in the measurement view.
1
Place the measuring instrument into the position in which the
measurement is to be carried out.
Read the measured values on the display.
Freezing a reading, displaying the
maximum/minimum value
The current reading can be frozen. The maximum and minimum values since
the last time the instrument was switched on in the standard view or during a
multi-point or continuous measurement can be displayed.
◄
1
Press
The following are displayed in turn:
o
Hold: frozen measured value
o
Max: Maximum value
o
Min: Minimum value
o
Current measuring value
►
/
to select the required option and confirm with
IMPORTANT
several times until the desired value is displayed.
7 Using the product
15