Device Overview - IDEC HR6S-AF Original Instructions Manual

Introduction

Device Overview

Outline
The device is a safety module for interruption of safety-related electrical circuits.
The device provides application functions used to monitor signals from different types of
sensors/devices.
Equipment with the following types of outputs can be connected to the safety-related inputs of the
device:
NO, NC, C/O, for example, Emergency Stop push-buttons, guard door switches, coded

magnetic switches
PNP transistors, for example, magnetic switches, proximity switches

OSSD, for example, light curtains

The device is available in two different types: Push-in terminals or screw terminals.
Feature summary:
6 application functions

Configurable start function

2 safety-related inputs

3 safety-related relay outputs

1 non-safety-related status/diagnostics outputs

1 non-safety-related start input with 8 selectable start functions

Connector for connection of extension module HR6S-EP to increase the number of safety-

related outputs by 6
16
HR9Z-B2192 8/2020