Table of Contents
Advertisement
6
Figure 9
Connecting
The Verifone Carbon device supports some peripheral devices designed for use
Optional
with electronic point-of-sale terminals.
Devices
Before connecting any peripheral device, remove the power plug from the
CAUTION
terminal. Reconnect the power cord only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and
use, refer to the user documentation supplied with those devices.
Different terminals support different devices, so for more information about
optional devices, please contact your Verifone distributor.
Optional Device
You can connect several devices to your Verifone Carbon. For reference, see
Connections
use the connection ports
Carbon.
You can use the MOD 10 RS-232 + USB/Mini-USB Multi-Communication dongle
(VPN CBL420-002-01-A and CBL420-002-02-A) as a PIN pad port or an RS-232
port, depending on the power source available.
Make sure you replace the rear cover when all cables are installed. This provides
NOTE
some protection to the cables and connectors. Do not carry the terminal by the
installed cables or pull the terminal about the by the cables. This may cause a
cable to be removed or damage the cables.
Some devices (ECRs and some PIN pads) require a separate power source.
CAUTION
Before connecting to any device, remove the power cord from the Verifone
Carbon unit.
Swing the MSAM cover down to secure it in place.
Closing MSAM Cover
for the list of devices you can connect to the Verifone
Connecting Optional Devices
V
C
I
ERIFONE
ARBON
NSTALLATION
S
ETUP
To
23
G
UIDE
Advertisement
Table of Contents
