Establishing Communication; Connecting By Ethernet Cable; Loading A Paper Roll In The Printer - VeriFone Carbon Installation Manual

Establishing
Communication
Connecting by
Ethernet Cable
Loading a Paper
Roll in the
Printer
CAUTION
You can connect the Verifone Carbon Printer Stand to your network using an
ethernet cable. You can also connect using the Wi-Fi option on the Verifone
Carbon.
Connect the ethernet cable to the ETH port on the printer stand, then route it
directly to a network jack (see
network.
Figure 3 Ethernet Connection
Before you can process transactions that require a receipt, you must install paper
in the printer.
The Verifone Carbon Printer Stand uses a roll of 57 mm wide x 40 mm, single-ply,
thermal sensitive paper.
A pink out-of-paper indicator line appears on the edge of the paper before the end
of the roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one more transaction.
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality Verifone paper, refer to
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
Figure 3). This is a direct connection to your
Accessories and
V
ERIFONE

Establishing Communication

Documentation.
C I G
ARBON NSTALLATION UIDE
S
ETUP
19