Table of Contents
Advertisement
User Manual 1260-50A/B
1260-50A/B
Module Specific
Syntax
Syntax
OPEN and CLOSE
MODULE SPECIFIC SYNTAX
The 1260-50A/B Coaxial switching module is
supported by the Option 01 Operating Systems at
Revision levels 18.1 and above.
The 1260-50A/B RF Multiplexer supports the OPEN, CLOSE,
PSETUP, RESET and PDATAOUT commands.
The module specific syntax for the 1260-50A/B RF Multiplexer is
as follows:
OPEN <module address>.<channel>[ ;<module address> . <channel>J
where <module address> is the address.
<channel> is the relay to be closed to connect an input to
the output.
Note that Channels remain closed until opened by an OPEN
command, RESET command, VXI hard or soft reset or power-
off.
The range of values for <channel> is:
1260-50A: ............................................................ 00-04, 10-14, 19
50-54, 59, 60-64, 69, 70-74, 79
1260-50B:
00-04, 10-14, 19 20-24, 29, 30-34, 39, 40-44, 49,
50-54, 59, 60-64, 69, 70-74, 79, 80-84, 89, 90-94,
99, 100-104, 109, 110-114, 119, 120-124, 129,
130-134, 139, 140-144, 149, 150-154, 159
The Module Specific Syntax for the CLOSE command is the
same as for the OPEN command.
Chapter 3
NOTE
Module Specific Syntax 3-1
Advertisement
Table of Contents
