KoamTac KDC470 User Manual
Hide thumbs
Also See for KDC470:
- User manual (25 pages) ,
- Quick manual (12 pages) ,
- Reference manual (386 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for KoamTac KDC470
Summary of Contents for KoamTac KDC470
- Page 1 KDC470 1/29/2018 User Guide...
- Page 2 Table of Contents KDC470 Product Concept ........................2 KDC470 Layout ............................3 How to Turn the Device On or Off ......................3 How to Pair with Your Smartphone or Tablet ..................4 How to Replace the Battery ........................6...
- Page 3 • PCI/EMV Payment Module • Extended Battery Pack Custom Smart Case for simultaneous charging ①. KDC Smart Case connects both KDC470 and its smartphone/tablets. ②. One charging port, either USB port or charging cradle, charges both KDC470 and smartphone/tablets.
- Page 4 To power on, press and hold the SCAN and DOWN buttons together for 3 seconds until the short beep sounds. The KDC470 will sound a long beep when it is ready to use. (it takes about 10 seconds until the long beep) ...
- Page 5 ④. Navigate to the Bluetooth settings on the host device and turn Bluetooth on. ⑤. Underneath the list of available devices, tap on the KDC470. The serial number will appear in brackets which you can cross check with the serial number on the back of the KDC.
- Page 6 ④. Navigate to the Bluetooth settings on the host device and turn Bluetooth on. ⑤. Underneath the list of available devices, tap on the KDC470. The serial number will appear in brackets which you can cross check with the serial number on the back of the KDC.
- Page 7 The battery may be recharged from any USB port or KDC charging cradle, and may be recharged about 300 times before it needs to be replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will cause noticeable performance degradation in the KDC.
Need help?
Do you have a question about the KDC470 and is the answer not in the manual?
Questions and answers