Using “KDCUHF” Application – Android/iOS ..................13 3.11 Using other Developed Applications with free SDK – Android/iOS ............15 Product Specifications ............................16 1.0W UHF Reader ............................16 0.5W UHF Reader ............................16 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p1...
The 1.0W or 0.5W UHF Reader is attached to the back of KDC470/475 SmartSled Scanners. 1.1 KDC470/475 1.0W UHF Reader Diagram * 1.0W UHF Reader mounted to KDC470 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p2...
T he KDC w ill beep w hen it is turned ON. * 2017/2018/early 2019 versions of KDC 470 turn on upon pressing sc an button. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p3...
The KDC only transmits data to the host device. Note: HID inputs data directly into an application. SPP requires the KOAMTAC SDK to input data into an application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/...
I n HI D or HI D W indow s Prof ile, check the list of available Bluetooth devices on your host devic e. From the list, selec t the KDC 470-BLE/475-BLE listed by serial num ber in brack ets See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p5...
Page 7
KDC470-BLE/475-BLE. KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on its screen. Now it is ready to use. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p6...
The KDC470 UHF reader should be used by a professional person who fully understands how to operate the KDC470 UHF reader. • Maintain at least 20cm (about 8 inches) between the KDC470 UHF reader and the body when reading UHF RFID tags. •...
UHF Mode to Barcode Mode to save battery life in the case of the trigger being stuck in the scan position. This option is enabled by default and may be disabled. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p8...
Scan the barcode on below that corresponds with your preference for Tag Counting. Count = 0 Count = 5 Count = 20 Count = 10 See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p9...
To test your connection, scan any barcode. If the connection is successful, the barcode data will display on the screen. (Fig. 3) See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p10...
Select ‘choose input method’ and you can select the default keyboard from here. (Fig. 5) < Fig. 4 > < Fig. 5 > See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p11...
< Fig. 8 > Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p12...
UHF c onf iguration. You can clear the current information with “Clear” button to re-read. g) To change the read mode, select the Barcode Mode button. See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p13...
Page 15
I D f or unique tags C OUNT Num ber of reads for eac h unique tag EPC data of tag read PC data of tag read See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p14...
3.11 Using other Developed Applications with free SDK – Android/iOS A Sof tw are Developm ent Kit (SDK) for Android and iOS is available to all KOAMTAC c ustom ers to ensure smooth developm ent of applic ations that work seam lessly w ith a KDC sc anner.
+13 to +27dBm (Japan +18 to +27dBm) Read Rate 100 tags per second 409,600 RFID tags Tag Storage (in case of 12 bytes of EPC Data) See Reference Manual for more detailed information. Visit store.koamtac.com to purchase additional products and accessories. QG_KDC470_UHF_20201014 p16...
Need help?
Do you have a question about the KDC470 UHF and is the answer not in the manual?
Questions and answers