Specifications - Mitsubishi DiamondPoint NXM76LCD User Manual

15"/17"
Table of Contents

Advertisement

Available languages

Available languages

Specifications

Monitor
Specifications
LCD Module
Viewable Image Size :
Native Resolution (Pixel Count) :
Input Signal
Display Colors
Maximum
Viewing Angles
Synchronization
Horizontal :
Range
Resolutions Supported
Active Display Area
Speakers
Practical Audio Output :
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
NXMLCD122702.p65
DiamondPoint
NXM56LCD™ Monitor
Diagonal :
15.0 inch
15.0 inch
1024 x 768
Video :
ANALOG 0.7 Vp-p/75 Ohms
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
16,777,216
Left/Right :
80°/80° (CR>5)
Up/Down :
70°/80° (CR>5)
31.5 kHz to 60.0 kHz
Vertical :
56.2 Hz to 75.1 Hz
720 x 400*
1
@ 70 Hz
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768 @ 60 Hz to 75 Hz ......... ...... recommended resolution at 75 Hz for
Horizontal :
304.0 mm/12.0 inches
Vertical :
228.0 mm/9.0 inches
1.0W + 1.0W
100 – 240 V ~ 50/60 Hz
0.65 – 0.35A
344.8 mm (W) x 344.2 mm (H) x 166.0 mm (D)
13.6 inches (W) x 13.6 inches (H) x 6.5 inches (D)
4.4 kg
9.7 lbs
5°C to 35°C/41°F to 95°F
Humidity:
30% to 80%
Feet:
0 to 10,000 Feet
-10°C to 60°C/14°F to 140°F
Humidity:
10% to 85%
Feet:
0 to 31,500 Feet
13
13
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.297 mm dot
pitch; 300cd/m
white luminence;
2
450:1 contrast ratio, typical
Digital Input: DVI
Depending on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC-Mitsubishi Electronics Display cites
optimal display performance.
12/27/02, 3:32 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamondpoint nxm56lcd

Table of Contents