Table of Contents
Advertisement
WARNING:
other than instructed. Doing so could cause a dangerous malfunction
which could result in serious injury or death.
3. Check to ensure the handwheel is closed and
SEA is depressurized (Fig. 3).
4. Unscrew the fill port cap from the fill port
(Fig. 4).
5. Closely inspect the fill port opening to
ensure that no debris, residue or moisture is
present.
CAUTION:
this indicates that water may have entered the first stage and cylinder. DO
NOT fill or attempt to use SEA until it has received complete inspection
and any required service by a manufacturer trained service technician.
DO NOT attempt to loosen or remove any components of SEA
If moisture is found to be present inside the fill port opening,
Red Indicator
Ring Visible
"OFF"
"OFF"
POSITION
POSITION
Figure 3
Fill Port Cap
Fill Port
Figure 4
9
Advertisement
Table of Contents
