Using The Center Console Work Surface - Vehicles With: Console Shift - Ford F-150 2023 Owner's Manual

Center Console Work Surface
E331800
Push the latch on the side of the work
surface to rotate it toward the driver. It
rotates into 11 lockable positions in 5°
increments.
Note: The work surface must be in the
home position when driving your vehicle.
Note: Do not drive with the work surface
rotated. This could interfere with steering
your vehicle.
Note: Do not adjust the steering column
with a rotated work surface.
Note: Do not raise the seat when the work
surface is in the forward or rotated positions
to avoid damaging it.
Note: To avoid damaging the work surface,
do not use it as a handle when entering or
exiting the vehicle.
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Floor Console
E346160
1. Press the button to release the folding
surface.
E327043
2. Open the work surface. Fold the work
surface to close.
USING THE CENTER CONSOLE
WORK SURFACE - VEHICLES
WITH: CONSOLE SHIFT
To use the center console work surface,
stow the selector lever. See Stowing the
Selector Lever (page 270).
226
(If Equipped)
(If Equipped)