Ford F-150 2023 Owner's Manual page 574

WARNING: Never place anything
between the vehicle jack and your
vehicle.
WARNING: It is recommended that
the wheels of the vehicle be chocked,
and that no person should remain in a
vehicle that is being jacked.
WARNING: Switch off the running
boards before jacking or placing any
object under your vehicle. Never place
your hand between the extended running
board and your vehicle. A moving running
board may cause injury.
WARNING: Only use the specified
jacking points. If you use any other
locations you could damage vehicle
components, such as brake lines.
Park on a level surface, activate the hazard
flashers and set the parking brake. Place
the transmission in park (P) and turn the
engine off.
Note: Only use the spare tire carrier to stow
the tire and wheel combination provided
with your vehicle. Other tire and wheel
combinations can cause the tire carrier to
fail.
Note: Do not use impact tools or power
tools operating at over 200 RPM on the
spare tire carrier, this could cause a winch
malfunction and prevent a secure fit.
Note: Passengers should not remain in the
vehicle when the vehicle is being jacked.
Removing the Vehicle Jack and
Tool Bag
The vehicle jack and tool bag are in the rear
passenger side of your vehicle, behind the
passenger seat.
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Changing a Road Wheel
570
E323384
1. Turn the wing bolt on the jack bracket
counterclockwise to release the jack
and tool bag from the jack bracket.
E327650
2. Remove the jack and tool bag from the
jack bracket.
E323386
3. Release the jack tool bag straps.