Checking The Wiper Blades; Replacing The Front Wiper Blades - Ford F-150 2023 Owner's Manual

Note: Use intermittent wipe positions to
adjust the rain sensor sensitivity.
When you select low sensitivity, the wipers
operate when the sensor detects a large
amount of water on the windshield.
When you select high sensitivity, the wipers
operate when the sensor detects a small
amount of water on the windshield.
CHECKING THE WIPER
BLADES
Improving Your Windshield Wiper
Performance
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT
WIPER BLADES
E165804
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Wipers and Washers
1.
Note: Do not hold the wiper blade to lift the
wiper arm.
2. Lift the wiper blade primary locking clip.
3. Press the wiper blade secondary
4. Remove the wiper blade.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
5. To install, reverse the removal
Note: Make sure that the wiper blade locks
into place.
144
Pull the wiper blade and arm away
from the glass.
E327597
E327598
locking clip.
procedure.
2