Table of Contents
Advertisement
WHAT IS UTILITY IDLE MODE -
VEHICLES WITH: FLIP KEY
Utility idle mode allows you to remove the
key from the ignition and keep the vehicle
and bed power point running.
SWITCHING UTILITY IDLE
MODE ON AND OFF - VEHICLES
WITH: FLIP KEY
Switching Utility Idle On
1.
Start the vehicle. See Starting and
Stopping the Engine (page 233).
2. Press Features on the touchscreen.
3. Press Pro Power Onboard.
4. Press Generator Mode.
5. Press Utility Idle.
6. Turn the key to position 0.
7.
Remove the key from the ignition.
Switching Utility Idle Off using the
Key
1.
Insert the key into the ignition.
2. Turn the key to position III.
Switching Utility Idle Off using the
Center Display Screen
1.
Start the vehicle. See Starting and
Stopping the Engine (page 233).
2. Press Features on the touchscreen.
3. Press Pro Power Onboard.
4. Press Generator Mode.
5. Press Utility Idle.
6. Press Turn Vehicle Off.
WHAT IS GENERATOR MODE
Pro-Power On-Board
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Onboard Generator
(If Equipped)
Generator mode uses the vehicle engine
to increase power to the bed power outlets
up to the rating listed on the power outlet
label.
SWITCHING GENERATOR
MODE ON AND OFF
Using the Center Display Screen
1.
Start the vehicle. See Starting and
Stopping the Engine (page 233).
2. Press Features on the touchscreen.
3. Press Pro Power Onboard.
4. Press Generator Mode.
Using the Instrument Panel
Press the button to switch
between off, convenience mode,
E311311
and generator mode.
RESETTING GROUND FAULT
DETECTION
After disconnecting all electrical loads the
ground fault can be reset using the
switches on the power point, on the
instrument panel or on the touchscreen.
Use the controls on the touchscreen to test
the ground fault detection circuit.
221
Advertisement
Table of Contents
Troubleshooting
