Table of Contents
Advertisement
Note:
To enter the menu system at any time during playback, plug in a USB
mouse and hold the left mouse key in the corner area as shown below for
10
seconds.
* You will be asked for a password if a password has been
pre-configured.
2.2. Basic settings
You must attach a USB mouse to the signboard to configure settings.
(Fig. 2.2.1)
Basic settings allow users to configure 3 important signage application
settings: Network, Time zone and Content.
Each time the Basic settings menu is entered, the signboard will start playback
automatically after 15 seconds if content services have been set previously.
Auto playback can be canceled by clicking on the button while it's counting
down.
To enter the Advanced Setting menu, click the Advanced button.
5
Advertisement
Table of Contents
