Size, Weight And Operating Conditions; Internal Temperature - DCS 992 User Manual

dCS 992 User Manual
dCS Ltd

Size, Weight and Operating Conditions

Size and Weight
Operating Conditions
Manual part no: DOC063992 iss 2A1
Contact on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
The dCS 992 dimensions correspond to a standard 1U 19" rack mount case.
Four heavy duty feet, fitted to the base, extend the overall height to slightly
greater than 1U.
Dimensions
Width
Height, without feet
Height, with feet
Depth
Weight
note (i)
note (ii)
note (iii)
The case of the dCS 992 has no ventilation slots or fan cooling, to give:
•
quiet operation (does not need to be installed in a machine room)
•
internal temperature stability
•
improved electrical safety
•
long term reliability
•
no regular maintenance or cleaning requirements
It dissipates relatively low power, so that usually allowing natural convection
provides enough cooling. Do not install the unit near heat sources such as
radiators, air ducts or direct strong sunlight. Ambient should not exceed 50°C,
should not fall below 0°C, and should be non-condensing. If in doubt, the easy
test is – the dCS 992 is happy to work anywhere a human is.
x
430 mm see note (i)
44 mm (1U)
52 mm
390 mm see note (ii)
6.8 kg see note (iii)
Removable 19" rack mount ears are supplied,
taking total width to 483 mm (19").
Measured from front
connectors. Additional depth should be allowed to
accommodate cable connectors.
The high quality case is necessarily heavy,
consideration should be paid to appropriate support
shelving when installing the units in a rack.
x
Page 53
Manual for Software Version 2.0x
January 2001
panel to rear panel
file 063992ma2a1.pdf available from website
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk