DCS 992 User Manual page 30

dCS 992 User Manual
dCS Ltd
Assigning Generators to Outputs
Manual part no: DOC063992 iss 2A1
Contact on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
Each AGEN generator can be routed to between 0 and 4 AES outputs
simultaneously. The mechanism for this is as follows.
In each AGEN generator box is the Setup button, and below it is a box showing
the frequency of that generator. To route that generator to an output, click in that
box and drag to the output that you want, as below:
You can also drag the AGEN 1 generator over the SDIF outputs, and this makes
them "Linked to AGEN 1". However, you cannot drag any other AES generators
over the SDIF outputs, and the remote will reflect whether an output can accept
a generator by the following means:
generator acceptable
Manual for Software Version 2.0x
generator not acceptable
Page 30
January 2001
file 063992ma2a1.pdf available from website
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk