Basic Parameters; Lg (Changing The Language For The Help Texts); Mode (Selecting Visible Parameter Group); Ctrlmode (Activation Spool Positioning Control) - WEST PAM-198-P Technical Documentation Manual

5.2

Basic parameters

5.2.1 LG (Changing the language for the help texts)

Command
LG
Either German or English can be selected for the help texts in the WPC-300 program.

5.2.2 MODE (Selecting visible parameter group)

Command
MODE
This command defines the group which parameters should be displayed. Inactive parameters are partially
masked independent from the selected group.
SYSTEM Basic settings of the device or application
IO_CONF Definitions of the input and output signals of the device
ADAPT Signal processing and adaption
CTRL Parameterizing of the position controller
PAM Parameters of the power stage
ALL No selection, all active parameters are visible

5.2.3 CTRLMODE (activation spool positioning control)

Command
CTRLMODE
Switching between Open Loop control mode as simple power amplifier and Closed Loop control mode with
PID controller and connected feedback for spool position control.
In open loop mode the power stage can be controlled directly via the feed forward parameter. This option nor-
mally can only be used for valves which ensure a stable positioning of the spool without electronic control. But
it can also be useful here to optimize the feed forward and offset settings before activating the PID controller.
Page 19 of 33
Parameters
X x= DE|EN
Parameters
X x= SYSTEM|IO_CONF|ADAPT|
CTRL|PAM|ALL
Parameters
X x= OL|CL
Unit
-
Unit
-
Unit
-
PAM-198-P
Group
-
Group
SYSTEM
Group
SYSTEM
05.06.2020