Restoring Factory Settings; Aquaclean Water Filter - Saeco Xelsis Suprema Manual

Adjusting other machine settings

Restoring factory settings

AquaClean water filter

Do not turn the grind setting knob more than one notch at a time to prevent
damage to the grinder.
1 Place a cup under the coffee dispensing spout. 1
2 2 Remove the lid from the coffee bean hopper.
3 3 Tap the Espresso icon and then press the start/stop
4 4 When the grinder starts grinding, press down the grind setting knob and turn
it to the left or right.
By tapping the Settings
- - Water hardness: you can choose between 5 levels according to the water
hardness in your region.
- - Standby time: you can select 15, 30, 60 or 180 minutes.
- - Display brightness: you can select low, medium and high.
- - Language: you can select the display language of your preference.
- - Sound: you can activate or deactivate the beeping sound of the machine.
- - Front illumination: you can choose 'always on', 'on during brewing' or 'always
off'.
- - Measuring unit: you can choose between ml. or oz.
The machine offers you the possibility to restore the factory settings at any
moment.
1 Tap the Settings 1
2 2 Use the up and down arrows to select 'Factory settings'. Confirm by tapping
the OK icon.
3 3 Press the start/stop
- - The settings are now restored.
The following factory settings are restored to default: water hardness, standby
time, display brightness, sound
Your machine is AquaClean enabled. You can place the AquaClean water filter in
the water tank to preserve the taste of your coffee. It also diminishes the need
for descaling by reducing limescale build-up in your machine. You can purchase
an AquaClean water filter from your local or online retailer or authorized service
centers.
icon you can adjust the following machine settings:
icon.
button to confirm that you want to restore the settings.
, front illumination, profiles.
button.