Connecting The S88 Booster - tams elektronik S88-2 Manual

tams elektronik

4. Connecting the s88 booster

Checking the s88-feedback modules
You should check if the s88-feedback modules are working properly before connecting them to
s88 booster. See the manual for the s88-feedback modules. That way you can prevent faults
occuring after installing the s88 booster due to the s88-feedback modules. Avoid interference
caused by external electrical signals during the funtional test.
Please note:
!
Before installing the s88 booster you should check if the s88-feedback modules used in your
model railroad layout are compatible with a voltage supply of 12 V and so with the s88
booster. Please note the section 2 ("Operation overview")!
Connections
s88 First s88 feedback in the s88 bus
Zentrale Receiver (central unit, interface, memory)
X1 Transformer
Connecting the s88 booster | 13
S88-2