Package List - Launch X-431-IMMO Pad User Manual

LAUNCH
Operating Temp.
Storage Temp.
1.3.2 VCI (Vehicle Communication Interface)
Size
Working voltage
Memory
Hard disk
Typical power consumption
Communication
Working temperature

1.3 Package List

The following packing list is for reference purpose only. For different destinations, the accessories may vary. For details,
please consult from the local dealer or check the packing list supplied with this tool together.
No.
1 Display tablet
2 SmartLink C
3 OBD II extension cable
4 OBD I adaptor
5 Cigarette lighter cable
6 Battery clamps cable
7 Crossover cable
8 Power adaptor
9 Data cable
10 Password envelope
11 Non-16pin adaptor cable kit
X-PROG 3 immobilizer
12
programmer kit
0℃ ~ 50℃
-20℃ ~ 70℃
204mm x 110mm x 45mm
DC 9 ~36V
256MB
8GB
≤ 6W
 Bluetooth/Wi-Fi or data cable connection (for Diagnostics)
 Ethernet (only for SmartLink Diag.)
0℃ ~ 50℃
Item
Indicates the test results.
Connects to vehicle's DLC port to access vehicle's live
data.
Connects the VCI for extension purpose.
Connects the non-16pin connector to the VCI.
Supplies power to the non-16pin connector through
connection to the vehicle's cigarette lighter receptacle.
Supplies power to the non-16pin connector through
connection to the vehicle's battery.
Connects the SmartLink C device to the modem.
Charges the tablet.
Connects the VCI to the tablet to perform vehicle
diagnosis.
A piece of paper bearing Product S/N and Activation
Code, which is needed for product registration.
Connects to non-OBD II vehicle DLC port (For more
detailed adaptor cables, refer to the package box).
Includes the X-PROG 3 and the accessory.
Description
2
X-431 IMMO PAD User Manual
Qt.
1
1
1
1
1
1
1
1
1
1
1
1