Table of Contents
Advertisement
LAUNCH
6 Diagnosis
6.1 Intelligent Diagnose
Through simple Wi-Fi communication between the tablet and VCI, you can easily get the VIN (Vehicle Identification
Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve
it from the remote server and then guide you to vehicle information page without performing the step-by-step manual
menu selection.
The vehicle information page lists all historical diagnostic records of the vehicle, which lets the technician have a total
command of the vehicle faults. In addition, a quick dial to Local Diagnose and diagnostic function are also available on
this page for reducing the roundabout time and increasing productivity.
*Notes:
• Before using this function, please make sure the VCI is properly connected to the vehicle's DLC port. For detailed connection,
see Chapter 4.5.2.
• A stable network connection is required for this function.
Follow the steps below to proceed.
1. Tap Intelligent Diagnose to start pairing with the VCI.
2. After pairing is complete, the tablet starts reading the vehicle VIN.
A. If the VIN can be found from the remote server database, the following screen will appear:
• Tap Diagnostic to start a new diagnostic session.
• To perform other functions, tap Quick access to directly go to the diagnostic function selection screen. Choose the
desired one to start a new diagnostic session.
• Tap Scan History to view its historical repair record. If there are records available, it will be listed on the screen in
sequence of date. If no records exist, the screen will show No Record.
• Tap View record to view the details of the current diagnostic report.
• To perform other functions, tap Quick access to directly go to the diagnostic function selection screen. Choose
the desired one to start a new diagnostic session.
B. If the tablet failed to access the VIN information, the following screen will appear:
18
X-431 IMMO PAD User Manual
Advertisement
Table of Contents
