Endoscopy Positioning; Additional Information; Care Instructions; Disposal Instructions - Image Engineering CAL4-E User Manual

3.4

Endoscopy positioning

Please verify that:
•
The image height includes the test chart height.
•
The lens is precisely in the middle of the test chart
Not fulfilling these requirements will lead to a non-uniform illuminated field of view and might provide
questionable measurement results.

4 ADDITIONAL INFORMATION

4.1

Care instructions

•
Do not touch, scratch, or pollute the diffuser.
•
If there is any dust on the diffuser, clean it with an air blower.
•
If the fiber is removed from the CAL4-E, the illumination is invalid
•
Store and transport the CAL4-E only in the delivered hard case.
4.2

Disposal instructions

After the service life of CAL4-E, it must be disposed of properly. Observe your national regulations and ensure
that CAL4-E cannot be used by third parties after disposing of it.
Contact Image Engineering if assistance for disposal is required.

5 TECHNICAL DATA SHEET

See annex for the technical data sheet. It can also be downloaded from the website of Image Engineering:
https://image-engineering.de/support/downloads.
Image Engineering
Seite 5 von 5